NEW COMFORT RACK! click here to learn about our newest product.

OUR ORIGINAL CAGE RACKS, now used by veterinarians for almost thirty years were designed to be lightweight, durable, easy to clean, and of a design that allows papers and bedding to be changed without disturbing the animal in the cage.  The specially made legs, similar to sled runners in appearance are of prefabricated 3/8” cold-rolled steel. These are bent according to the size of cage rack they will be used for, and the mesh platform is welded to the top of them. In the case of racks used in larger cages, a center support is also welded to the platform. After welding is complete, the rack is then coated with the finest p.v.c plastisol available.  This coating is oven cured, smooth, durable, can be cleaned with any product on the market, and guaranteed not to chip, crack or peel for three years.  Although it happens infrequently, we cannot promise that some determined critter will not damage the floor with their teeth. One must keep their eyes peeled for that overly destructive animal and, especially, never put rabbits on coated flooring.

The finished rack stands close to four inches tall. A rack 21.5 x 27.5 weighs 13 lbs. These racks remain  popular for two reasons. One is their lower cost, and the other is for better circulation of air when using a cage dryer after bathing. 

OUR COATED ALUMINUM RACKS  were developed  in 1995 in response to requests for even lighter cage racks.  These racks are made from high quality aluminum, dipped in the same high quality plastisol as our other products. The  legs are 1/4 x 1” aluminum bar welded to a similar frame.  A 21.5” x 27.5” coated aluminum cage rack weighs only 8.5 lbs.    The  height of these floors is 2 1/4” from the floor to the top of the mesh. This allows almost two inches additional head room for those larger dogs.  As with our original racks, the floors for larger cages have an extra pair of legs in the middle. They have been more popular at a rate of five to one than our original coated steel racks due to their shorter height, lesser weight  and ease of handling.

Both our coated aluminum and coated steel cage racks are designed to hold the weight of the animals that will fit in the appropriate size cage that the rack is made for.
They are not made to put into runs as resting platforms for oversized  animals or where human weight might be applied . Products for this type of use can be special ordered .
We carry all standard sizes for Shoreline, Suburban and VSSI cages as well as for other manufacturers such as Dirck and Snyder, with most sizes in stock and ready to ship to you by U.P.S. . We can also custom make similar racks for those tricky tapered fiberglass cages or those home- made cages of various sizes.

Click here for price sheet

Order form for Regular Custom racks

Order Form for Tapered Coated Aluminum Cage racks

Order Form for Custom Coated Steel Cage racks